nyclad
05-04-2017, 08:55 PM
Hi guys,
A few months ago, I replaced the cyan imaging unit on my KM Bizhub C450 and everything worked fine immediately. I didn't do a gradation adjustment as everything seemed to work well.
I just replaced the magenta imaging unit, and it doesn't seem to work, I'm probably missing a step or something here. During warmup, there are a series of loud clicking noises I don't recall hearing on the cyan imaging unit replacement. The magenta is extremely faint with the new imaging unit. I've attached the demo page.
I tried to do a gradation adjustment according to page 33, but gradation adjustment refuses to work. I looked up page 306, and read the instructions carefully, and I have A3 paper loaded, but I can't get it to start. When I press the start button, it sounds like it's going, but ultimately no gradation page is printed.
Any ideas?
Thanks!
A few months ago, I replaced the cyan imaging unit on my KM Bizhub C450 and everything worked fine immediately. I didn't do a gradation adjustment as everything seemed to work well.
I just replaced the magenta imaging unit, and it doesn't seem to work, I'm probably missing a step or something here. During warmup, there are a series of loud clicking noises I don't recall hearing on the cyan imaging unit replacement. The magenta is extremely faint with the new imaging unit. I've attached the demo page.
I tried to do a gradation adjustment according to page 33, but gradation adjustment refuses to work. I looked up page 306, and read the instructions carefully, and I have A3 paper loaded, but I can't get it to start. When I press the start button, it sounds like it's going, but ultimately no gradation page is printed.
Any ideas?
Thanks!