jay3
05-08-2017, 06:01 AM
[KM C6500 - newly acquired, just going through it to establish some baseline maintenance so that it will suit my needs]
Pulled fuser assembly out planning to replace just the fuser belt...
(I've been getting some "greasy" looking track marks (http://www.copytechnet.com/forums/konica-minolta/119567-greasy-track-roller-marks-prints-c6500-fuser-belt-sample-images-attached.html) on prints)
Inspecting it, it looks like there is a bunch of white gunk on the lower fuser roller (https://ibb.co/dNCeBQ): (<-- full size link)
36554
As well as some gunk on the right side as well... (https://ibb.co/iV4sWQ) (<-- full size link)
36555
Maybe I should buy a lower fuser roller too before taking this thing apart?
Any idea what this stuff is? Is there any type of cleaner or solvent that can be used on that lower roller to clean it?
Thanks!
Pulled fuser assembly out planning to replace just the fuser belt...
(I've been getting some "greasy" looking track marks (http://www.copytechnet.com/forums/konica-minolta/119567-greasy-track-roller-marks-prints-c6500-fuser-belt-sample-images-attached.html) on prints)
Inspecting it, it looks like there is a bunch of white gunk on the lower fuser roller (https://ibb.co/dNCeBQ): (<-- full size link)
36554
As well as some gunk on the right side as well... (https://ibb.co/iV4sWQ) (<-- full size link)
36555
Maybe I should buy a lower fuser roller too before taking this thing apart?
Any idea what this stuff is? Is there any type of cleaner or solvent that can be used on that lower roller to clean it?
Thanks!