Printmend
05-08-2017, 11:06 AM
Hi,
I'm am getting a C6102 error on a Konica Minolta C200.
I have checked for any obstruction, home sensor is working, cables and motor ok.
Looking at the BCRU pcb but this is expensive @€500+ and don't think its worth it..
Any ideas???
I'm am getting a C6102 error on a Konica Minolta C200.
I have checked for any obstruction, home sensor is working, cables and motor ok.
Looking at the BCRU pcb but this is expensive @€500+ and don't think its worth it..
Any ideas???