PDA

View Full Version : Bizhub C227 scew adjustment


Custom Search


finni72
05-10-2017, 09:12 AM
Hi!

I have some issues with the Bizhub C227.
The customer complaining about scew copies and scan from the document feeder.

I have tried the automatic feed adjustment, and adjusted the screw on the right hinge, but it doesn't help.
I have adjusted the scanner scew, so the copy from the glassplate is perfect.

Does any other of you have the same problem with this machine.

Max
05-10-2017, 11:07 AM
Have you tried the height screws? Chances are one side of DF is higher than the other

finni72
05-10-2017, 11:21 AM
Thanx.

Yes, I have tried to adjust the hight on the left hinge.
Even when I try to adjust the scew max in both direction, it won't help any.

Woxner
05-10-2017, 01:07 PM
did you use the chart for the df skew adjustment.

finni72
05-12-2017, 08:27 AM
Yes, I used the Test Chart and the Installation manual.

Custom Search