PDA

View Full Version : Oce' cm 3521 tranfer belt fuse


Custom Search


jper34
05-11-2017, 07:26 PM
Hi Folks,
I have a customer with Oce" CM 3521 series, that she actually has a fuse to reset the tranfer belt assem., to clear the code.
I went out, removed the belt, and trying to help customer, as the best seems fine, and not causing any copy quality issues. I just dont where the heck the fuse is located...? it looks like the :bus fuse" from a cars fuse box, from the past. they had other issues, that I took care of, but I'm not sure where this fuse is located, and will the copier eventually go into a code and shutdown the copier?...so any help greatly appreciated !!!


Jaime
Indep. Copier Svc.
CT.

Synthohol
05-11-2017, 11:13 PM
left side of the unit look for 2 gold square contacts. its behind that.
may need a 00 phillips.

Desert Rat
05-12-2017, 01:59 AM
That fuse is very low amperage. I usually get mine from Precision roller. Cheap for them.

DR

Synthohol
05-12-2017, 12:06 PM
should be a 1/16 Amp (.063A)

Custom Search