Bizhub 364e DF624 C258 Df 629 skew issue

[SmellsHot]

Is anyone having issues with the doc feeds on the mid range machines. It seems like everyone I have at some point has bad skew. I've fought with the auto adjustment chart and the mechanical skew but the skew is so far off. I've actually been lifting up on the front left corner of the scanner glass frame and this will bring the adf back into a reasonable range.
Anyone else having this problem?

[allan]

Re: Bizhub 364e DF624 C258 Df 629 skew issue

Who is sitting on your copiers?

[CraigW]

Re: Bizhub 364e DF624 C258 Df 629 skew issue

I align the ADF to square up after having it in place, before the auto adjustments lately.

[allan]

Re: Bizhub 364e DF624 C258 Df 629 skew issue

Yes on setup you need to. It just looks silly if you don't they are skew good and proper out of the box.
My vice for a while was not running the auto adjustment.