bizhub 920 c41-02 @ 41-01

[mircea]

Hello.
I've been strying to solve this problem for the last 4 days and i dont have any new ideas.
I have a bizhub 920 with c41-02 code and it sometimes gives 4101 code too.
already replaced:

Printer control board (PRCB)
DC power supply /1 (DCPS1)
AC drive board (ACDB)
Overall control board (OACB
High voltage unit /1 (HV1)
Scanner drive board (SDB)
scanner home sensor
scanner motor
DC power supply /2 (DCPS2)
and whole laser unit.

can any1 please give me any new ideas?
I\m realy out of ideas .

thank you!

[mircea]

Hello.
I've been strying to solve this problem for the last 4 days and i dont have any new ideas.
I have a bizhub 920 with c41-02 code and it sometimes gives 4101 code too.
already replaced:

Printer control board (PRCB)
DC power supply /1 (DCPS1)
AC drive board (ACDB)
Overall control board (OACB
High voltage unit /1 (HV1)
Scanner drive board (SDB)
scanner home sensor
scanner motor
DC power supply /2 (DCPS2)
and whole laser unit.

can any1 please give me any new ideas?
I\m realy out of ideas .

thank you!




closed.. solved this

[blackcat4866]

closed.. solved this

If I may ask, How did you solve it? =^..^=

[mircea]

If I may ask, How did you solve it? =^..^=

after i replaced all boards i wanted to just give up.. but after i put everything together i powered copier with adu out and it works just fine..
looks like it was a false code 4101 and 4102...
lase unit and scanner unit had nothing wrong.
there were 2 ipcs blown on 2 different boards.
i put all old boards on another bizhub 920 and there was no code.. only close front door error.
I will replace it anyway with a 950 since it is old and did its job good for a long time. (20m+ pages printed)


Problems tend to solve the moment u are ready to give up!