PDA

View Full Version : Bizhub C-353, IU Units interchange...


Custom Search


Oystercopy
05-27-2017, 07:15 AM
Hey.. does anyone know if the Drum (Imaging) units are actually INTERCHANGEABLE on this series with the other C-250/252 and maybe C-253 series? I know they're a different part number, but they physically FIT in the slot.... I have the reset chips for the units, but the machine's not running right now for me to test them. I have a main motor on order and when I put it in, I intend to try the other units, so see if they're accepted by the machine, and it will work.

Thanks in advance,
OC

copier tech
05-27-2017, 12:08 PM
Yes they do, simply use the old chip & fit onto the new IU

copyman
05-28-2017, 02:27 AM
It's been awhile but I think I had to change the connector from one unit to the other. Even after chipping display showed to replace IU. Not sure if it was a C253 in C353 or other way around.

I would be very surprised if the C250/252 would work in a C353 with just the chip.

Oystercopy
05-28-2017, 03:08 AM
Thanks guys.. I guess I'm going to have to find out one way or the other!

ck1
05-28-2017, 08:06 AM
C250/252 IU total difference with C253/353 . the drum and dev uint gear not same cant put in also

allan
05-28-2017, 03:08 PM
C200 and C253 is exchangeable, the one has the corona cleaner and the other not.

copyman
05-29-2017, 03:25 AM
Not to go off topic I wanted to add something that may be helpful to someone. All the toners from C200, 203,253,353 are interchangeable if you use a universal chip and cutting some fins on the toner cartd. Unlike the IU's which will all fit in each machine but give a message the toners will not, you have to cut fins on front of toner cartridge for it to fit in other models.

copyman
05-29-2017, 03:26 AM
Not to go off topic I wanted to add something that may be helpful to someone. All the toners from C200, 203,253,353 are interchangeable if you use a universal chip and cut some fins on the toner cartd. Unlike the IU's which will all fit in each machine but give a message the toners will not,  you have to cut fins on front of toner cartridge for it to fit in other models.

Custom Search