PDA

View Full Version : image light at lead edge


Custom Search


captkirk
08-18-2008, 06:08 PM
Bizhub c500 pro
we had a problems with this machine last week. and it ended up being the blades were set to tight on the developer unit cyan.
the problem we are having now is that the lead edge of the print, you can see it good on text has a ghost effect. the lead edge of the text is a little lighter in color than the rest. this only happens in the color text, not black.
I have seen this on a black and white copier but I cannot remember what we did to fix it.
would the write adjustment help?

Thanks

random
08-19-2008, 07:38 AM
what is the restart timing like?

westvandude
04-14-2014, 10:10 PM
Back from the dead.... I'm interested too.

Leading edge of cyan text faded for 1-2 characters, fairly small point text. Bizhub C550.

westvandude
04-15-2014, 01:24 AM
Figured it out, IU was low on toner.

Go into service mode, then eventually into TCR Supply. Click on the colour with the issue. Hit START. Sometimes it takes two cycles to fill the IU properly.

:)

Custom Search