PDA

View Full Version : Miscellaneous Question at End of Every Operation


Custom Search


MFPs R Now PCs
06-01-2017, 12:07 AM
We have a bizhub C552DS that is asking with a Yellow Triangle Exclamation Mark on a White Background "Do you wish to continue to use the destination and Job settings?" after EVERY Copy, Scan and Fax job initiated. I have never seen this before. I have looked at different settings under User and Administrator as well as reset to Factory Default the Default Copy Settings and Default Scan/Fax Settings under User Settings. I have even reset Network Setting Data, Copy Program Data and Address Registration Data in tech mode under System 1/Initialization. Where do I turn this off? Thanks in advance!

B0265
06-01-2017, 08:34 AM
Check this setting:
[Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset] - [Next Job]

blackcat4866
06-01-2017, 12:39 PM
Many Kyocera's do this: Are you sure? Are you sure? Are you sure?

YES! I'M SURE! =^..^=

MFPs R Now PCs
06-01-2017, 03:46 PM
Check this setting:
[Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset] - [Next Job]

That was it! I thank you for your time and advice, it is much appreciated.

Custom Search