PDA

View Full Version : Biz hub 751 web drive


Custom Search


nmfaxman
06-08-2017, 05:24 PM
Have a problem with web drive.
At first the web would not drive because the inner gears would pop and skip a tooth.
Replaced the mount, thinking it was bent, and now the outer white gears don't mesh up.

Is there a TB about this?
I need the new part #'s to repair the drive.
Need to rebuild the fuser, but need to fix web before I do.

Thanks for any input.

Synthohol
06-09-2017, 02:17 AM
is the white tang lined up with the solenoid that advances it?
in the copier on top of the front of the fuser is one of these https://goo.gl/jfxFqU

allan
06-09-2017, 04:47 AM
Jip you need to remove the left side cover to find it. It needs to to be adjusted properly on replacement.

nmfaxman
06-12-2017, 06:59 PM
The solenoid and actuator are good.
I turned gears manually to advance web when the web gear popped on #17 and wouldn't advance further.
Removed drive unit and noticed Frame #15 was slightly bent.
Replaced Frame, but now Gears 1,2,and 16 don't mesh enough to drive web.

36850

Ordering new gears, but $70.00 each?????
There must be another solution.

Custom Search