PDA

View Full Version : bizhub c6500 gamma auto adjustment


Custom Search


mircea
06-09-2017, 01:31 PM
hello.
I'm trying to find more info on printer auto gamma adjustment under drum particularity menu.
this is all info there is in service manual.

There are eight kinds of the "Auto gamma adjustment" (0 to 7), however, conduct "Auto gamma
adjustment 0" only in the field.
"Automatic gamma adjustment 0": Perform the Dmax density adjustment, dot diameter adjustment,
automatic drum potential adjustment, and the gamma adjustment for all screens.
"Automatic gamma adjustment 1 to 7": Performs the image stabilization adjustment by screen.

The reason i want to know more is there are moments when i get 2840 code on 0 adjustment and on 1 it works fine. Or number 4 gives error and number 3 works just fine. I just want to know what's the difference betwen all this numbers.

Thank you very much!
Any info on this topic is very much appreciated since i spent a lot of time searching for answares and no1 knew anything.. Even some KM techs couldnt give me more info .


Good day!

Custom Search