allan
06-13-2017, 05:03 PM
Hi guys.
I have a machines that is around 200K total.
Its is pulling the toner to the drum and out the waste port faster that is can replenish. Last toner bottle lasted only 1200 prints.
The CQ is good on the paper and its seem to only do it when it is adding toner.
Anyone seen this before. The drum is in yield and the dev tank.
Only black is a problem.
The toner is not original. but works fairly well on the rest of them.
I have a machines that is around 200K total.
Its is pulling the toner to the drum and out the waste port faster that is can replenish. Last toner bottle lasted only 1200 prints.
The CQ is good on the paper and its seem to only do it when it is adding toner.
Anyone seen this before. The drum is in yield and the dev tank.
Only black is a problem.
The toner is not original. but works fairly well on the rest of them.