PDA

View Full Version : Minolta DI 750 and all clones f 32-10 code


Custom Search


nmfaxman
08-20-2008, 06:26 AM
Not in the manual and ran into it today.
Turned out to be the recycle auger stopped driving and the cleaning auger motor wouldn't turn.
No part # for the shaft that was almost cut off by the c-clip binding on the back.
I reversed the rear bushing and cut a new groove for the clip with a dremel tool. Threw some washers to center the middle gear.
Let you know how it works tomorrow.
Sucks I couldn't order the shaft.

FYI

Custom Search