PDA

View Full Version : can we swap CREO IC-304Plus with Fiery box ?


Custom Search


garuda
06-15-2017, 05:06 AM
Hi folks,
Bizhub C6501 with Creo IC-304Plus won't boot, always saying no operating system.
We don't have any Creo CDs, but have another Oce CS650 which is Konica with Fiery box.
Can we use the Fiery box in the Konica C6501 ?

Many thanks for the advise.

Thanks

mthomasebs
06-15-2017, 09:51 AM
Hi folks,
Bizhub C6501 with Creo IC-304Plus won't boot, always saying no operating system.
We don't have any Creo CDs, but have another Oce CS650 which is Konica with Fiery box.
Can we use the Fiery box in the Konica C6501 ?

Many thanks for the advise.

ThanksYes of course, they're usually sold with fiery controllers.

Just not sure about cloning your Creo, but with a fresh install the Fiery will definitely work.

Tech Helpdesk
06-15-2017, 11:30 AM
Yes of course, they're usually sold with fiery controllers.

Just not sure about cloning your Creo, but with a fresh install the Fiery will definitely work.

As he said http://www.copytechnet.com/forums/images/icons/icon14.png

Custom Search