PDA

View Full Version : konica minolta bizhub c287


Custom Search


brent
06-28-2017, 10:58 PM
I thought this was going to be a flimsy machine and I was right.. we got 150k out of it.. and I went to replace the belt and put it all back together and it rhasps
now just vibrates.. ended up bringing it to the shop and it still did it.. when I take the transfer roller out the noise goes away but of course it wont work
to make a quick fix I shoved some paper above the transfer belt to give it downword pressure and it works fine now.. but I cant take it back like this
any thoughts on this? did I bent something In the rear side while taking out the belt? it looks ok. any help?

thanks all

brent

copier tech
06-29-2017, 07:03 AM
What if you put the old belt back in, does the noise go?

Custom Search