PDA

View Full Version : Printing red on bizhub c6000 comes out dark maroon


Custom Search


MORGY
07-05-2017, 10:14 AM
Hi Everyone

Bizhub C6000 is printing dark maroon when the actual color is red. I did all the color calibrations for Fiery and Machine, loaded new fiery software and firmware, tested IDC sensors and even swapped IDC sensors cleaned developers, drums and charge units. I also check all feiry and machine color profiles and reloaded feiry software on oc but the problem still persists.( I went through the c7000 / c6000 trouble shooting guide)

I also noticed that the toner density on the paper (Gloss SRA3)is high but the when I checked the machine and fiery software on pc was ok.

The user was printing large print volume and came up with this fault.

I took the same image to test on another C6000 and was ok, the red color came out fine.

Has anyone who experienced the same fault who can kindly assist me here.

Custom Search