PDA

View Full Version : Dead Machine FS3040idn display and keyboard dead

Custom Search


Daveyboy
07-13-2017, 02:55 PM
Hi,

I have a customer with with FS3040 and the machine comes to life but the buttons and display are dead.
Any ideas?
Scott
07-13-2017, 05:04 PM
possible button stuck?? replace keyboard?
Daveyboy
07-13-2017, 06:11 PM
possible button stuck?? replace keyboard?

Hi tried checking anything like that.
I've spoke to a friend at Kyocera and they have never had it.
The machine initialises but screen and buttons dead no ready light etc.
gtheflea
07-26-2017, 04:09 PM
Hi tried checking anything like that.
I've spoke to a friend at Kyocera and they have never had it.
The machine initialises but screen and buttons dead no ready light etc.

Have you tried updating the machine firmware?
Phil B.
07-26-2017, 06:04 PM
Hi,

I have a customer with with FS3040 and the machine comes to life but the buttons and display are dead.
Any ideas?

has anyone worked on it recently? if not sounds like it could be the display controller bd or the display it's self. do you have a scrap machine that you can rob the parts off of for test? I would start with the display.
HenryT2
07-26-2017, 10:10 PM
has anyone worked on it recently? if not sounds like it could be the display controller bd or the display it's self. do you have a scrap machine that you can rob the parts off of for test? I would start with the display.

I've had a similar situation , and found loose connections to the display PWB .

Custom Search