PDA

View Full Version : Miscellaneous Konica C284 latest firmware


Custom Search


Fuzzylogic
07-26-2017, 12:09 AM
Hello Fellow Technicians

This C284 takes too long to process a print job. It sits there and blinks away for ages then only prints part of a job. I would like to install the latest firmware to start with so as to eliminate any compatibility issues. Is there somewhere that I can purchase the firmware from?

Regards

Fuzzylogic

Woxner
07-26-2017, 01:20 AM
ck your pm

5thsmiley
07-29-2017, 01:48 AM
Konica(KonicaMinolta) guards their firmware very closely. It will be tough to get. They generally threaten to prosecute anyone using it without their permission and paying for it. Good luck.


Sent from my iPhone using Tapatalk

Don N.
08-01-2017, 12:19 AM
Agree with FW update. Just to add on, I had one that would not email. It was at Function Ver. 1 Had to do a 2-step Special FW version update then it emails fine. Something about hash 1 vs. hash 2. I also notice some are very retarded at the control panel... Slow, beeps unresponsive or late. Newer FW fixed that too.

Fuzzylogic
08-18-2017, 07:53 AM
ck your pm
Thanks very much for the link. Does that Firmware have the "movie data" included?

Regards

Fuzzylogic:o

Woxner
08-18-2017, 11:43 AM
No

Fuzzylogic
08-21-2017, 01:59 AM
No

Thanks Woxner

Bugger,.............................. is there any chance that you may know where to acquire this movie data as the machine seems to be O.K. with the new firmware but it now says "No animation guide available". Can this be turned off or does it need the "movie data installed".

Regards

Fuzzylogic:cool:

Don N.
08-21-2017, 03:15 AM
Thanks Woxner

Bugger,.............................. is there any chance that you may know where to acquire this movie data as the machine seems to be O.K. with the new firmware but it now says "No animation guide available". Can this be turned off or does it need the "movie data installed".

Regards

Fuzzylogic:cool:

https://drive.google.com/drive/folders/0B0TP29a-CrlDQ3g3cEFaMTQ1Nzg?usp=sharing

This animation FW is for C224/C284/C364

Fuzzylogic
08-21-2017, 05:54 AM
Thanks very much for the link. I will install it and let you know how it goes.

Regards

Fuzzylogic:cool:

Fuzzylogic
08-28-2017, 07:22 AM
https://drive.google.com/drive/folders/0B0TP29a-CrlDQ3g3cEFaMTQ1Nzg?usp=sharing

This animation FW is for C224/C284/C364
Thanks very much for the link Don. I installed the movie data and all is O.K...............I am now waiting for the next disaster to happen:eek:

Regards

Fuzzylogic:cool:

Custom Search