bizhub Di2010f

[felix76]

Good afternoon everyone,

I am at a loss. I have received a bizhub Di2010f in trade for some work I did.

I am having a hard time finding the driver online at Konica Minolta's website.

I called customer support and did not receive any support. They would not help without a service agreement.

I have a windows 7 system, 64 bit. I don't really trust all of the drivers4free.sites

Anyone have a good recommendation to find a successful driver for this old unit?

Thank you in advance

[Woxner]

there were none made for this. when w7 came out this was too old. if it has no finisher install bh 222/282/362 it should work

[Woxner]

by the way they discontinued this model like 5 years ago. hard to find parts.

[felix76]

there were none made for this. when w7 came out this was too old. if it has no finisher install bh 222/282/362 it should work


Would you be able to help walk me through it. I can't find the 222/282/362 download on the km website?

[EarthKmTech]

you dont need a 3rd party driver, windows 7 64 bit natively supports it, you may have to choose windows update when selecting the source for the driver.

I have setup old Di2510 series in win 7 64bit for people previously in this manner no problems.

The native driver is very basic though, forget about account codes or anything like that, it will let you print and thats about it.

[Don N.]

you dont need a 3rd party driver, windows 7 64 bit natively supports it, you may have to choose windows update when selecting the source for the driver.

I have setup old Di2510 series in win 7 64bit for people previously in this manner no problems.

The native driver is very basic though, forget about account codes or anything like that, it will let you print and thats about it.

Ditto EarthKMTech W7 should have drivers after a win update in the add printer wizard. Be patient. It may take 5 min or more to update.

[felix76]

I still can't get this to work.

The driver that I downloaded is for the 3510. It came from the KM website.

Does anyone have a good source to download older drivers?

[EarthKmTech]

I still can't get this to work.

The driver that I downloaded is for the 3510. It came from the KM website.

Does anyone have a good source to download older drivers?


2010 and 3510 are the same machines, just yours is slower ppm.

I have a 2510f in my garage that works waiting to go to the dump when I can be bothered, not sure you got good compensation for your work.

Also, if your finding it not behaving on the network properly this is a common problem. The network card is an optional accessory and all are dying now if not dead already. Unsure of whats required to repair, probably replacing dried out capacitors but as these machines are discontinued and boat anchors here I have not investigated further.