PDA

View Full Version : Bizhub 227 will not ...


Custom Search


acusso1234
08-15-2017, 10:14 PM
problemchild

Bizhub 227 will not print.

No Rj45 lan jack lights. no error or codes in service call information. Move to different drop problem continue, hooked up laptop on both straight and crossover cables no lights. Can loopback machine ping machine successfully. Couldn't ping know operating valid ip addresses. Reset all connectors to Mfp board, uninstalled Hdd, then re-installed problem continues. Unit is warranty really don't want to replace Mfp is there's a alternated solution. Yes copying functions work place with another printer used same ip address works fine.:confused::confused:

Woxner
08-15-2017, 11:15 PM
if you cant connect in all cases its the mfp. you can try and do a network reset in service mode but i think you mfp is a gonner.i have seen machines ping but mfp is still bad. you should have link lights

Synthohol
08-16-2017, 01:49 AM
admin mode network settings, is everything enabled as it should be?

problemchild
08-18-2017, 09:03 PM
Replace mfp board all is good

Custom Search