View Full Version : Scan error bizhub 454
devontug
08-16-2017, 08:20 PM
I get this error when ever I try a smb scan don't know what could be the problem as I have setup another with same smb settings... https://uploads.tapatalk-cdn.com/20170816/d3a81e7d60a7109e3a822a325cdefe46.jpg
Sent from my iPhone using Tapatalk
allan
08-16-2017, 10:14 PM
Did you check the job history details?
Woxner
08-16-2017, 10:42 PM
what op system are you using ip or computer name. may need soft sw 162 set to hex 2 if using name or firmware update
EarthKmTech
08-16-2017, 11:04 PM
what op system are you using ip or computer name. may need soft sw 162 set to hex 2 if using name or firmware update
E series or non e series ?
Welcome to the hell on earth that will be the 50 billion calls for "cant scan to smb anymore" as SMB v1 gets disabled on servers.
devontug
08-16-2017, 11:10 PM
Will check which version I'm on so will an updated firmware fix the problem?
Sent from my iPhone using Tapatalk
Woxner
08-16-2017, 11:18 PM
maybe but like i said need to know if its ip or name in which case firmware will work with the soft sw i mention. smb2 /3 can be used
devontug
08-16-2017, 11:20 PM
maybe but like i said need to know if its ip or name in which case firmware will work with the soft sw i mention. smb2 /3 can be used
IP address
Sent from my iPhone using Tapatalk
devontug
08-30-2017, 03:06 PM
Still haven't gotten this machine to scan anyone has any idea please and thanks
Sent from my iPhone using Tapatalk
copyman
08-30-2017, 05:27 PM
Did you setup & connect a computer directly to the copier and try to scan to it? This will eliminate the network for troubleshooting.
devontug
08-30-2017, 06:07 PM
Did you setup & connect a computer directly to the copier and try to scan to it? This will eliminate the network for troubleshooting.
Yes I did and it failed
Sent from my iPhone using Tapatalk
Synthohol
08-30-2017, 10:12 PM
in admin mode turn on network errors to display.
report back the actual error code in the job log.
devontug
08-30-2017, 10:21 PM
in admin mode turn on network errors to display.
report back the actual error code in the job log.
error code 107 server connection error
Sent from my iPhone using Tapatalk
Synthohol
08-30-2017, 10:28 PM
if you are scanning by IP, can you ping the server or workstation from the copier?
ping is in networking under
Network Settings-Detail Settings-PING Confirmation
otherwise it may be SMB ver 1 is disabled as mentioned above.
devontug
08-30-2017, 10:34 PM
if you are scanning by IP, can you ping the server or workstation from the copier?
ping is in networking under
Network Settings-Detail Settings-PING Confirmation
otherwise it may be SMB ver 1 is disabled as mentioned above.
When I try to ping the machine workstation
Sent from my iPhone using Tapatalk
devontug
08-30-2017, 10:36 PM
When I try to ping the workstation
Sent from my iPhone using Tapatalk
Ping failed check the connection and settings
Sent from my iPhone using Tapatalk
Woxner
08-30-2017, 10:57 PM
is there anti virus blocking it. also you never said if this is w7,w10 etc. makes a difference. turn firewall off.
devontug
08-30-2017, 11:11 PM
is there anti virus blocking it. also you never said if this is w7,w10 etc. makes a difference. turn firewall off.
Checking the as we speak as I tried a different computer and the scan works comparing Both to see the differences both are running win7 with service pack1
Sent from my iPhone using Tapatalk
Synthohol
08-30-2017, 11:22 PM
check the ip scheme. seems they are not on the same network.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.