PDA

View Full Version : BizHub C6501 - Using a Mouse Instead of Touch Screen


Custom Search


CPM Mike
10-04-2017, 04:46 PM
I had read other posts in this forum that suggest I can use a USB mouse when my touch screen dies.

Can anyone advise how to get this to work? I have plugged a USB mouse into the Fiery Controller but never see the pointer on the screen.

If you could provide a step by step process, I would be very grateful.

dagoof
10-07-2017, 05:57 PM
Hi Mike,

I believe there's a panel you remove on the back of the 'arm' that the screen is mounted on (the pivoting cylindrical section) - at least I think it's around there!

Synthohol
10-07-2017, 06:50 PM
here it is.
http://www.copytechnet.com/forums/attachments/konica-minolta/37823d1507398600-bizhub-c6501-using-mouse-instead-touch-screen-mouse-jpg

CPM Mike
10-10-2017, 04:01 PM
I am very grateful that you posted the photo! I would never have thought to look under the little plastic cover as I always thought the mouse plugged into the Fiery Controller.

Thank you so much!

Custom Search