PDA

View Full Version : cyan color fails to print on ineo + 454e


Custom Search


jakani
10-10-2017, 06:30 PM
hello everyone ,

here i will attach a demo page from two different printers and you can see the difference in colors ! 3783837839

there is no cyan color !

i never had this problem before and i don't know how to solve it

any suggestion would be much appreciated

thank you very much

acusso1234
10-10-2017, 09:30 PM
A broken last gear on the cian dev unit can cause that. The printer does not error
while it isn't producing blue at all.

blackcat4866
10-11-2017, 01:14 AM
What have you done so far? =^..^=

jakani
10-11-2017, 09:24 AM
A broken last gear on the cian dev unit can cause that. The printer does not error
while it isn't producing blue at all.

thanks for your suggestion , no there is no error message or anything ! it prints normally without cyan color


What have you done so far? =^..^=

thank you for replying
i did nothing but i'm willing to change the dev unit

jakani
10-11-2017, 06:28 PM
hello everyone ,

i found out that the cyan dev unit was not turning right when i rmeved it i found tonner stuck in front tube and a mix of developer and toner inside the printer , i replaced it and the printer worked just fine but i have to go back to clean that inside very well

thanks everyone

Custom Search