BH-C-280, new TB ruined after 1K. [Archive]

Hansoon

10-23-2017, 01:15 PM

BH-C-280, new TB ruined after 1K.

Anyone seen this before?

Hans

STACVB

10-23-2017, 03:23 PM

Only one think .... closed door too hard

Mitch Barron

10-23-2017, 04:33 PM

Yes indeed I have. the issue is due to those stupid claws that lightly run on the belt itself. I have had a few break on me with the 220/280 series and luckily they were replaced through garantee. In the earlier belts there was just one of those claws and when the paper hit just right it would push it over Centre and poke a hole in the belt. Results were always known to me as the Butterfly Problem. The hole would produce Butterfly figures on prints. Heck of a Thing to deal with when you don't have alot of belts in inventory. My advice, do as I do and rip those stupid claws off and be done with it. I have ripped off all of mine since about 5 years and i think had one small issue that 1 Piece of paper slipped through above the belt and rested on top. made a mess, but the belt was fine. Best of luck!

Mitch

Albonline

10-23-2017, 06:51 PM

separation claws, remove them

blackcat4866

10-23-2017, 10:52 PM

37976

Hmmm. Looks familiar. =^..^=

copier addict

10-23-2017, 11:28 PM

37976

Hmmm. Looks familiar. =^..^=

Was that picture just a way for you give us all the finger? Lol

blackcat4866

10-23-2017, 11:35 PM

That picture was sent to me 5 days ago. I responded with "Hey! Which finger is that?"
His response: "Pointer. lol."
=^..^=

Hansoon

10-24-2017, 04:37 AM

That's weird. Automatically my post appears twice.

BH-C-280, new TB ruined after 1K. (http://www.copytechnet.com/forums/konica-minolta/123906-bh-c-280-new-tb-ruined-after-1k.html)

BH-C-280, new TB ruined after 1K. (http://www.copytechnet.com/forums/konica-minolta/123905-bh-c-280-new-tb-ruined-after-1k.html)

I SWEAR I posted it only once but only edited it.

Hans

chazmanian2429

10-27-2017, 01:16 PM

The separation claw can be removed but I would make sure that they are not damaged and if they are then replace them

srvctec

10-28-2017, 05:02 PM

That's weird. Automatically my post appears twice.

BH-C-280, new TB ruined after 1K. (http://www.copytechnet.com/forums/konica-minolta/123906-bh-c-280-new-tb-ruined-after-1k.html)

BH-C-280, new TB ruined after 1K. (http://www.copytechnet.com/forums/konica-minolta/123905-bh-c-280-new-tb-ruined-after-1k.html)

I SWEAR I posted it only once but only edited it.

HansI was wondering what happened to my post here but it's in the twin thread. Forum Gremlins, apparently.