BH-C-280, new TB ruined after 1K.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3350
    #1

    BH-C-280, new TB ruined after 1K.

    BH-C-280, new TB ruined after only 1.8 K.

    Anyone seen this before?

    Something punched the TB. The hole is not exactly there where the picker finger touched the belt. Furthermore the picker finger does not show any signs of force which was to expect if the picker finger would have caused such a massive damage to the belt. Than what was it??

    BTW: Is it normal that newer TB's have 3 instead of one only picker finger?

    Hans
    Last edited by Hansoon; 10-23-2017, 02:59 PM.
    “ Sent from my Intel 80286 using MS-DOS 2.0 “
    https://www.copytechnet.com/images/smilies/biggrin.png
    Tags: belt, bh-c-280, finger, picker
    • srvctec
      Former KM Senior Tech

      500+ Posts
      • Oct 2009
      • 827
      #2
      Re: BH-C-280, new TB ruined after 1K.

      Probably the customer getting rough when removing a jam.
      Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.

        Comment

        • srvctec
          Former KM Senior Tech

          500+ Posts
          • Oct 2009
          • 827
          #3
          Re: BH-C-280, new TB ruined after 1K.

          For some reason it won't let me edit my post from earlier today. It is normal for the new belts to have 3 picker fingers.
          Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.

            Comment

            Previous template Next
            Working...