PDA

View Full Version : Bizhub c227 new firmware- which bit should be turn on


Custom Search


cyta123
11-01-2017, 09:12 PM
In a new firmware for Bizhub c227 was made a modification becouse of streaks on the transfer belt surface. Theres is a n information:
>>KMI has release a Special FW (based on MR3.3) includes "Filming suppressing function" for individual cases.
Engine FW DipSW No. 27: 0=OFF (default), 1=ON <<

But which bit should be turn on, does any one know?

B0265
11-02-2017, 08:42 AM
A Engine FW DipSW can only be set to off or on.

copier tech
11-02-2017, 08:55 AM
Turn it on if your have this issue, if not leave it off.

cyta123
11-02-2017, 04:54 PM
Thx. I will check it tomorrow.

cyta123
11-03-2017, 09:49 PM
I have just found Engine FW DipSW. THX

copier tech
11-04-2017, 10:40 AM
I have just found Engine FW DipSW. THX


Please share to benefit others :0)

cyta123
11-18-2017, 04:33 PM
Service mode => Security mode=> Engine FW DipSW

Custom Search