PDA

View Full Version : Jamming Bh 601 J3204


Custom Search


rbalanjr
11-02-2017, 03:03 AM
Hi I have a bh601 that doesn't want to cooperate. I replaced the duplex motor, exit sensor after the fuser, replaced the exit solenoid and exit drive clutches. Are you guys have anymore recommendation? I also put in a rebuild fuser to cover my base but to no avail. Thanks.

copier addict
11-02-2017, 11:26 AM
I don't remember what a J3204 refers to on this machine, but I do remember there is a paper driven guide on the exit side of the fuser that would cause problems. It has light spring on it. Sometimes the point where the spring attaches to the guide will break off and cause jamming.

manuelcorrea
11-02-2017, 04:55 PM
Remove exit section and check for bent mylars

Custom Search