View Full Version : Konica minolta bizhub c 203 machine stop working
ahson1989
11-21-2017, 06:17 AM
Hi. I have bizhub C 203 before its working fine but suddenly the display got off and machine not running. When i switch on the machine no display only power light is working. machine stop working i replaced ram and NVRam but still there is nothing. I replaced the power supply but the disply still off. Please help.
Zesti
11-22-2017, 12:19 PM
what's response of sub-power switch on panel, any beep when pressed?
ahson1989
11-22-2017, 04:42 PM
what's response of sub-power switch on panel, any beep when pressed?
Yes there is beep when we off and on from the sub- power.
ahson1989
11-22-2017, 04:45 PM
Yes there is beep when we off and on from the sub- power.
I changed the nvram and now the machine is stop on konica minolta logo on display. Machine is running but the display stays on the logo.
Thomas007
11-22-2017, 06:23 PM
You need NvRAM recovery.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.