PDA

View Full Version : Remove Blank Pages setting - WHEN PRINTING?


Custom Search


SlipperyCat
11-28-2017, 03:17 PM
Is there an option on the Konica devices (specifically Konica 423) where you can apply a setting to remove blank pages when printing? A client is printing from a certain software application (to print forms) and we've adjusted the CR/LF options that their IT group recommended but it's printing a blank page after each page.

I know there's an option for blank page removal for scanning, but anything for printing?

We can't manipulate anything in the print driver because it's form software that's all done through a print queue, so it's not something where a driver preference opens up.

Thanks for any info!

Synthohol
11-28-2017, 10:37 PM
isnt there a setting for lines per page?

KenB
11-29-2017, 02:04 AM
I agree with adjusting the lines per page, if the option is available.

SlipperyCat
11-30-2017, 08:39 PM
Yes, the CR/LF settings were there, and adjusted, but I don't think Konica equipment has a setting to skip blank pages for printing like some other manufacturers. That's ok, the customer just thought they would see if it were possible. Not a deal breaker. As of now, we've moved past it. :)

Custom Search