Black streaks on copies / printout - bizhub c552

[AhmedChamumi]

Helo everyone,

Attached are the samples from bizhub c552 which was recently replaced with MFPB , hand drawn arrows indicate paper feed direction, so far i have tried PH relay board, flat cables and firmware rewriting with no visible improvement...am i faced with another MFPB replacement?

Best of regards,

Ahmed R. Chamumi.

[blackcat4866]

Is that a mirror image? Is that function turned on? =^..^=

[AhmedChamumi]

Is that a mirror image? Is that function turned on? =^..^=

By mirror image do you mean the copied image? if so this happen to both printing and copies as well, i haven't quite understood when you asked if the function is turned on...what function please/

Best of regards,

Ahmed R. Chamumi.

[AhmedChamumi]

By mirror image do you mean the copied image? if so this happen to both printing and copies as well, i haven't quite understood when you asked if the function is turned on...what function please/

Best of regards,

Ahmed R. Chamumi.


Mirror image is not turned on.

[Zesti]

Mirror image is not turned on.Ur MFPB is bad.

Sent from my RHYTHM RX60 using Tapatalk