View Full Version : konicaminolta C7000(IC-306) need user software cd v2.0
kmcopytech
12-04-2017, 04:39 AM
Hi,Guys!
My Press C7000+IC-306,It has now printed 3 million.
38317
IC-306 server can not enter the system,
Attempt to use FCT recovery failed,Stuck here.
38318
I'm going to install the system on a SSD.
The user_sw cd was missing when I preparing to reinstall the system.
38319
Any help?
E-mail:kmcopytech@gmail.com
Thanks!
Synthohol
12-04-2017, 11:54 PM
i only have ver 3.01 of both system and user but i think the fiery has to have the win7 upgrade to use 3.01.
kmcopytech
12-05-2017, 12:47 AM
Email send.
Good day.
Thanks!
kmcopytech
12-05-2017, 12:51 AM
i only have ver 3.01 of both system and user but i think the fiery has to have the win7 upgrade to use 3.01.
Do I need a dongle to upgrade to WIN7 V3.01?
Thanks!
Synthohol
12-05-2017, 04:10 AM
the dongle is to activate the graphic arts package. its not needed for standard use but if they want to run Impose then yes.
for ver 3.01 the upgrade kit includes a bios and ram to upgrade to windows 7.
kmcopytech
12-05-2017, 11:01 AM
the dongle is to activate the graphic arts package. its not needed for standard use but if they want to run Impose then yes.
for ver 3.01 the upgrade kit includes a bios and ram to upgrade to windows 7.
Thanks!
jpablo_mza
08-23-2018, 05:25 AM
Dear, I need the version 2.0 of that fiery (Pro80), I lost the discs and xp does not start, someone will have the images ?? Thank you very much for your help
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.