View Full Version : Konica 7040 toner error
techd
09-08-2008, 02:41 PM
hi i have a konica 7040 that's giving a false toner low message, sometimes i can power it down or open the toner access door and then close it, this clears the message but then it comes back after a while and the toner is only 7days old, any suggestions will be welcome, thanks.
LY3IJ
09-09-2008, 04:54 AM
toner bottle motor binding.... just a guess.... is the bottle turning?
smiley
09-09-2008, 11:26 AM
maybe the toner sensor is faulty.just try to reset the L detection.or maybe theres lack of toner in developing unit.:) make a force toner drope.
techd
09-11-2008, 02:33 PM
thanks a lot how do i do the toner drop test?
smiley
09-15-2008, 11:24 AM
hold 36 button. then swicth on the main power swicth then go to hv adjustment then look for force toner supply. then ok.do it multiple times until add toner disapear,:)
techd
09-18-2008, 02:52 PM
thanks a lot i will try that and see how it works!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.