C552 Transfer Belt Jig

[KipCody]

I have a c552 that we bought second hand last year. The transfer belt is due for replacement, and of course the jig to line everything up is missing. Does anyone know where I can find one to purchase? Thanks in advance for all the help!

KipCody :D

[AjitN]

I have a c552 that we bought second hand last year. The transfer belt is due for replacement, and of course the jig to line everything up is missing. Does anyone know where I can find one to purchase? Thanks in advance for all the help!

KipCody :D
There is no need for JIG.
If you want to replace Belt you can do without any JIG, which is actually useless for any thing

[KipCody]

Gotcha! I've not had to do this on this particular model so I just wanted to make sure. Thanks!

[EarthKmTech]

Have not seen that jig since the old c451 series. never even used it on those once either, absolute waste of time. just make sure the side door is as low as it goes by unscrewing the checkstrap at the front. (and not forgetting to reinstall it once done)