Overlapped or repeat prints KM FS-1028/fs1028

[husnainsafder1]

Hello Experts,
this is my 1st post to get guideline how to get rid of these repeating prints.
repeat printing comes on 1st few copies if we use multiple copies from Original.

but if we copy single print from the Originals then each copy have Repeatings.
please guide me.

[taskalfa]

Hello Experts,
this is my 1st post to get guideline how to get rid of these repeating prints.
repeat printing comes on 1st few copies if we use multiple copies from Original.

but if we copy single print from the Originals then each copy have Repeatings.
please guide me.


Could be your drum unit , try to stop the printed page just as it gets past the drum unit and check if the fault is evident on drum surface, also check if the heat rollers is worn

[Junior Cyrix]

Try to check your cleaning blade...or your whole drum unit try to replace.

[blackcat4866]

Get out your ruler and check the interval that it repeats at. That will help you identify whether it's drum cleaning, or fuser multiple imaging. =^..^=