PDA

View Full Version : Miss feed detected on Konica Minolta C360


Custom Search


musthafavi
12-31-2017, 07:56 AM
alternatively getting Miss feed detected message while scanning from ADF (Konica Minolta C360)

I didn't find out any miss feed, after restarting machine, it will work for while & again getting the same message

I have attached herewith screenshot

copyman
12-31-2017, 12:44 PM
Sounds like one of the sensors is either dirty or lever getting hung up. Did you open the spring loaded door on left underside of ADF and blow paper dust off black felt pad & sensor? When this felt pad has paper dust on it I have seen it cause intermittent jams and other strange things.

blackcat4866
12-31-2017, 04:04 PM
jam code? =^..^=

copier tech
12-31-2017, 04:04 PM
I’m assuming you have replaced all the DF rollers?
Where does the original stop? Is it catching? Check all the mylar guides, especially the small square ones they get small tears the paper will catch.

musthafavi
12-31-2017, 04:55 PM
jam code? =^..^=

Not showing any error code
It showing message as I attached above
"misfeed detcted
Remove paper indicated by 0"

blackcat4866
12-31-2017, 06:22 PM
Oh, maybe you could print a Management List? Around page 13 you'll find a long list of every jam that ever happened.

The enduser screen is not of much use unless you turn on DIPSW 30-1 so the machine displays the actual jam code. It's call Collection Data mode.

=^..^=

Desert Rat
01-03-2018, 03:06 AM
Blackcat,
Thank you for your last post. I will cut and paste this one in my tech file.


DR

musthafavi
01-03-2018, 04:26 AM
Blackcat,
Thank you for your last post. I will cut and paste this one in my tech file.


DR


Issue has been resolved

I just reinstalled the Feeder roller and cleaned the ADF by using blower

Now its working fine..

blackcat4866
01-03-2018, 11:04 PM
And still not jam code? This is no use to anybody.

Use the resources that are available to you. We all use jam code numbers to identify specific jams. You don't know if you were even in the right part of the machine. =^..^=

Custom Search