PDA

View Full Version : Biz hub 454e


Custom Search


antone
01-10-2018, 12:29 AM
Doc feeder 701 .. paper detection sensor not working ...changed sensor , document board.All the other sensors work..any 411 on this problem.
.


Sent from my SM-N920V using Tapatalk

allan
01-10-2018, 12:49 AM
What do you get. Original left on glass?

Check the ADF original set sensor...
Unplug the DF to check.

antone
01-10-2018, 01:48 AM
What do you get. Original left on glass?

Check the ADF original set sensor...
Unplug the DF to check.Allan...i hit start nothing happens...chk paper detection sensor not working

Sent from my SM-N920V using Tapatalk

copier addict
01-10-2018, 04:24 PM
Doc feeder 701 .. paper detection sensor not working ...changed sensor , document board.All the other sensors work..any 411 on this problem.
.


Sent from my SM-N920V using Tapatalk

Have you gone into service mode and checked that DF-701 is selected?
Also make sure all three connectors are properly seated.

antone
01-10-2018, 05:24 PM
Have you gone into service mode and checked that DF-701 is selected?
Also make sure all three connectors are properly seated.Yes .....did that asap

Sent from my SM-N920V using Tapatalk

allan
01-10-2018, 05:50 PM
So if you open and close the DF cover the rollers lift?

antone
01-10-2018, 06:37 PM
So if you open and close the DF cover the rollers lift?Yes that's ok...insert doc...hit start ...rollers don't come down ect

Sent from my SM-N920V using Tapatalk

Custom Search