PDA

View Full Version : Biz hub 223 with error C34223


Custom Search


axyun
01-25-2018, 02:55 PM
Did call yesterday on Bizhub 223 with error C3423. The heater lamp has one side with broken element. Is there anywhere a replacement lamp for this series machine as parts unavailable for fuser except for aftermarket rollers and thermistors. Please advise if there is a "fix" for this issue.

in meantime i will see if I can locate a used unit online. your help is very much appreciated. frank/Action Photocopy

blackcat4866
01-25-2018, 11:37 PM
I think the best that you can hope for, Frank, is that a member might have a corpse in the graveyard with your part still on it. I'd recommend posting the part number if there is a separate part number, or if not post a photo of the thing you desire. Perhaps you can work out an arrangement with that member.

There aren't a lot of these machines around anymore, and very limited parts, so you might consider selling them something new. =^..^=

JR2ALTA
01-25-2018, 11:38 PM
BIZHUB 223 283 363 423 FUSER UNIT A1UDR70911 A1UDR70922 | eBay (https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F11 2561697911)

copier addict
01-26-2018, 01:54 PM
Unfortunately, sometimes you have to bite the bullet and order a new fuser. We rebuild them as often as we can, but eventually the units we rebuild become too old and ordering a new one is the only alternative.

kenpio
01-26-2018, 01:57 PM
I hope that this not true. We still have alot of these out there. We have a hospital with about 30 of this family there. I order these fusers, developers, drums and transfer rollers all the time. I have not seen that they are not available, yet. The problem that we have is that this customer breaks the the exit actuator. Well I have two fusers on the shelf and one in may car.

Thanks
KEN

Custom Search