View Full Version : biz 501
OPC drum has scraches and i must replace it. Do i have to replace developer too? if i replace only drum and blade and not developer do i have any problem?
mrwho
01-25-2018, 10:21 PM
If the print quality is ok (except for the drum scratches) and if the developer isn't over life, then, if I remember correctly, there should be no reason to replace the developer.
Anyway it would be wise to take a developer bag with you just in case.
Synthohol
01-25-2018, 10:27 PM
if the DV life is under 60% you may get away with it.
just do your LD1s and LD@ adjustments. and reset the drum and blade counters.
i usually set them so the first shading blocks just shows up just over the line. saves for overtoning and the mess it becomes.
antone
01-26-2018, 03:37 PM
OPC drum has scraches and i must replace it. Do i have to replace developer too? if i replace only drum and blade and not developer do i have any problem?U can replace drum blade
Sent from my SM-N920V using Tapatalk
KMFLT3CH
01-31-2018, 08:09 PM
You can replace the drum and blade without the developer, np.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.