Imsdal
02-12-2018, 08:23 PM
I have this C353 that jam just outside the finisher.(FS-519)
Itīs jam because the paddle that is in the holder dont turn around to the home position and stop the paper to come out, this happen only when i use the stapler.
I have change the paddles (2) and the holder, I have clean the sensor, the clutch that drive the holder and no use.
When I enter the service mode and try the movement the paddle turn around just fine.
Can anyabody help me this issue.
Imsdal
Itīs jam because the paddle that is in the holder dont turn around to the home position and stop the paper to come out, this happen only when i use the stapler.
I have change the paddles (2) and the holder, I have clean the sensor, the clutch that drive the holder and no use.
When I enter the service mode and try the movement the paddle turn around just fine.
Can anyabody help me this issue.
Imsdal