PDA

View Full Version : Code to enter service mode? Accurio Press C2060L


Custom Search


liondor1969
02-18-2018, 06:12 PM
Please help my with code service mode to AccurioPress C2060..haw to enter in service mode..is possible to fined as service boock for this printer ??



Thanks

Synthohol
02-18-2018, 08:19 PM
hey, thats one beast of a machine there, if you are not trained on it seriously walk away.

i dont say that to be mean, i say it because they are very sensitive and if you have never worked on one you can accidently cause way more problems than you came there for.

liondor1969
02-19-2018, 05:30 AM
Thanks..i buy this is new printer with full service from konica fot 3 yar..i need this cod only for ceck kontor parts.. :-) i not need this for made service..

Thanks

QUOTE=Synthohol;594573]hey, thats one beast of a machine there, if you are not trained on it seriously walk away.

i dont say that to be mean, i say it because they are very sensitive and if you have never worked on one you can accidently cause way more problems than you came there for.[/QUOTE]

Synthohol
02-19-2018, 11:07 PM
print a meter sheet, that has all the info

liondor1969
01-21-2023, 05:23 PM
Hy..haw to made a color test drum on service mode..i dont know the code to made this too see wat cilinder drum is with problem..i have a line color
thanks

Synthohol
01-22-2023, 03:41 PM
Procedure
1."Service Mode menu screen"
Press [11 Test Mode]
2."Test Mode menu screen"
Press [01 Running Test Mode].
3."Running Test Mode screen"
Select the mode to conduct, and press [Print Mode].
4.Press the Start button to start the running test.
5.Press the stop button to stop the running test.
personally id run patterns 62 and 77 to evaluate.

liondor1969
01-22-2023, 03:59 PM
Thanks !



Procedure
1."Service Mode menu screen"
Press [11 Test Mode]
2."Test Mode menu screen"
Press [01 Running Test Mode].
3."Running Test Mode screen"
Select the mode to conduct, and press [Print Mode].
4.Press the Start button to start the running test.
5.Press the stop button to stop the running test.
personally id run patterns 62 and 77 to evaluate.


2."Test Mode menu screen"
Press [01 Running Test Mode].
3."Running Test Mode screen"
Select the mode to conduct, and press [Print Mode].
4.Press the Start button to start the running test.
5.Press the stop button to stop the running test.

wjurls
01-23-2023, 04:18 PM
Just run the density balance chart in the adjustment menu. No need to go into service mode. It will let you see the individual colors.

Custom Search