totoro
09-16-2008, 07:18 AM
Hi Guys,
I'm new to the KM6500 and to color machines in general. I have a customer that says that the copies or prints are light on the top edge on all colors and black. It is supposed to be the worst on Yellow. I'm assuming becase it is on everything that the transfer belt is going bad. It has less than 300k on it. I have one on order. Is there anything else I should be looking at? Is there an adjustment I need to make to correct this? Any advice would be great. TIA
Totoro
I'm new to the KM6500 and to color machines in general. I have a customer that says that the copies or prints are light on the top edge on all colors and black. It is supposed to be the worst on Yellow. I'm assuming becase it is on everything that the transfer belt is going bad. It has less than 300k on it. I have one on order. Is there anything else I should be looking at? Is there an adjustment I need to make to correct this? Any advice would be great. TIA
Totoro