KOnica C1060 IC-415

[vishop]

Hello Guys,

Anyone can share how to reload the Fiery System Software for IC-415?

I already have the system software with me version 2.1.
PC to LAN connection on Fiery Lan port
Set DIP/SW 1 - ON and DIP/SW 2 - OFF

IS that all? Then Fiery Setup from CDROM?

Thanks in advance

[wjurls]

Old post but in case someone else comes across this. Easiest to reload IC-415 using the usb option. Dip sw 1 to 0. Put system software on usb drive and insert into service port. Power up the fiery and walk away. It will load automatically. Takes about a half hour or so.