PDA

View Full Version : Bizhub C252 Fuser Lamp replace


Custom Search


alejandro
09-18-2008, 02:10 PM
Hello all,

I just opened the fuser on this machine and one of the lamps is broken. Where can I order one of these lamps or is there any replacement that I can use, what would be the serial number to replace?

thanks all for your help.

dogsbody
09-19-2008, 10:35 AM
can't get em, mate. we have had several lamps fail and just have to replace the fuser.
if anyone can get them i would like to know.
cheers

alejandro
09-19-2008, 12:49 PM
I am doing the research about replacement lapms. I will post when I find out.

thanks

kmcopytech
09-21-2008, 04:00 AM
This alone can replace the lamps,

Read the C252 Parts manual..

Haroldbfix
09-26-2008, 05:43 AM
can't get em, mate. we have had several lamps fail and just have to replace the fuser.
if anyone can get them i would like to know.
cheers

Yep!! whole unit.

alejandro
09-26-2008, 01:59 PM
I dont see to find the lamp on the Lamp manufacture (USHIO) website. Ill keep trying,
I have a feeling that is possible to do this.

ni311
09-28-2008, 08:08 AM
KM it is not supplying lamps alone, from their point of view you have to change the whole fusing unit. You might find a lamp that match the length, watts and connectors with the old one or you might get one from an old fusing unit.

DadO
09-30-2008, 05:21 PM
U will waste ur days, life, hair....till u find it....trust me :D

bigmark
10-02-2008, 01:01 AM
even if you do find a lamp that will fit, good luck getting the fuser apart, and then getting it back together again with out breaking anything. have seen many people try, and nobody has ever succeeded.

alejandro
10-02-2008, 02:25 AM
Im still looking for the lamp. no luck yet. Im down in the dominican republic and there are places where they fix pretty much anything electronic, and there are a lot of chinese parts and stuff like that. Im hoping I can get a look a like lamp.

anyway, this could be a project for me to waste time. Can anybody recommend a good place to buy the fuser for this machine? cheap?

thanks

Custom Search