HelloGoodSir
03-23-2018, 02:47 PM
39210
Hey All
Hoping for some help with a troublesome BH 363.
Attached is the example of the outputs from Tray 2,3 and 4.
Here is a list from my tech on what he did:
Change clutch for the 2nd paper feed section (not paper pick unit)
Changed clutch and bushings for the paper transport roller
Switched out bypass tray assembly
Switched out right side door
We also notice that:
If letter paper is printed with short edge first paper will not fold.
Legal and 11x17 will not fold if printed from tray 2.3 and 4
Only letter size printing long edge as leading edge will fold.
We have this thing under contract for another year, client has a loaner right now and the Boss is anxious to get the loaner back.
Thanks!
Hey All
Hoping for some help with a troublesome BH 363.
Attached is the example of the outputs from Tray 2,3 and 4.
Here is a list from my tech on what he did:
Change clutch for the 2nd paper feed section (not paper pick unit)
Changed clutch and bushings for the paper transport roller
Switched out bypass tray assembly
Switched out right side door
We also notice that:
If letter paper is printed with short edge first paper will not fold.
Legal and 11x17 will not fold if printed from tray 2.3 and 4
Only letter size printing long edge as leading edge will fold.
We have this thing under contract for another year, client has a loaner right now and the Boss is anxious to get the loaner back.
Thanks!