View Full Version : C6500 Right door open and occasional 3913
swaggen
03-26-2018, 05:59 AM
I removed the fuser. All the pins look in good shape. Do I need to pull the prongs out a bit?
Could this be caused by needing firmware update?
Synthohol
03-26-2018, 01:08 PM
just make sure the process unit and ADU are fully seated in the machine before closing the door.
swaggen
03-26-2018, 02:22 PM
just make sure the process unit and ADU are fully seated in the machine before closing the door.
Yes,.. I made sure of that. Same issue.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.