PDA

View Full Version : C6500 Right door open and occasional 3913


Custom Search


swaggen
03-26-2018, 05:59 AM
I removed the fuser. All the pins look in good shape. Do I need to pull the prongs out a bit?

Could this be caused by needing firmware update?

Synthohol
03-26-2018, 01:08 PM
just make sure the process unit and ADU are fully seated in the machine before closing the door.

swaggen
03-26-2018, 02:22 PM
just make sure the process unit and ADU are fully seated in the machine before closing the door.

Yes,.. I made sure of that. Same issue.

Custom Search