View Full Version : CQ Bizhub C280 Faded Black
DSharpe
04-14-2018, 03:10 PM
Whats up guys? Ive got a c280 that has fairly low miles on it. It has a new drum, belt unit and hopper unit installed. The machine will be running fine and then all of a sudden the black drops almost all the way out. it was running the other day and just started. I ran initialize+stablize and everything come back to normal but this is only temporary. All the while its running with hardly any black there is no P codes or any other type of codes. After i did the initialize+stablize is when the codes come up. Run grad adjust and everything is good to go temporarily. Attaching sample. Thanks for your help.
blackcat4866
04-14-2018, 03:30 PM
Sounds like the developer drive clutch to me. =^..^=
DSharpe
04-14-2018, 03:38 PM
Sounds like the developer drive clutch to me. =^..^=
Does this just cause the DV Unit or mag roller to quit turning?
blackcat4866
04-14-2018, 03:40 PM
Yes. =^..^=
DSharpe
04-14-2018, 03:41 PM
Yes. =^..^=
Much Appreciated!! and thank you for the quick response.
allan
04-15-2018, 06:25 AM
Don't think its the clutch black is developing. There the text font is missing.
Fixed this before by restarting before.
DSharpe
04-18-2018, 03:22 PM
Hey Guys, the black developer clutch did fix this issue! Thanks again
Phil B.
04-19-2018, 06:36 PM
Does this just cause the DV Unit or mag roller to quit turning?
yes
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.