C454 and C454e firmware

[GR81]

Do they take the same firmware?

[B0265]

No

[GR81]

Here is our dilemma, we are a Muratec dealer and we recently took on several KM to service.
We have a few that need firmware updates.
Well on Muratec's website I can get the firmware for all the "e" model machines but not the non "e" machines.
When we call Muratec for support they tell us they cannot help.
Any ideas where I can get non "e" KM firmware?

,

[Phil B.]

Here is our dilemma, we are a Muratec dealer and we recently took on several KM to service.
We have a few that need firmware updates.
Well on Muratec's website I can get the firmware for all the "e" model machines but not the non "e" machines.
When we call Muratec for support they tell us they cannot help.
Any ideas where I can get non "e" KM firmware?

,

KM website.

lol I see you got burned by the slick talking regional sales guy! we did too :mad::mad:

[GR81]

How do I access that through the KM website?
Don't I need a log in?
I can access drivers, but I don't see firmware.

[Synthohol]

you have to be a KM dealer to gain access to the technical part of their site.
or contribute some money to this site and ill give you a link(s)
just an offer. i get nothing out of it either way.

[GR81]

Contribution made.

[Synthohol]

links sent, lemme know if you have any issues.
thank you for helping support this site!

[joelea]

You can use c454e firmware up to k0 on a c454 but you have to go 72>A9>E4>G9>K0 don’t go past this. And don’t forget to set function version in service mode according to the bulletins with the firmwares.

[joelea]

No

Not true see my post above

[GR81]

Thanks Synthohol!
It's a great site, it has helped out a great deal.
We are mostly a Large format company (KIPs, Canon ipfs)
We are just getting are feet wet in the Muratec/KM market.

[GR81]

Synthohol,
Any chance you can get me versions GB0-A9 and GB2-K5?
it is to fix a specific scan error.

Notes:
1. NON-4e "Version Up firmware for MIF devices" is required to support SHA2. (bizhub C224/C284/C364/C454/C554/C654/C754)
You can use any of the following Special Firmware:



bizhub C224, C284, C364, C454, C554 Special Firmware Version GB0-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C654, C754 Special Firmware Version GB0-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C224, C284, C364, C454, C554 Special Firmware Version GB6-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C654, C754 Special Firmware Version GB6-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C224, C284, C364, C454, C554 Special Firmware Version GB5-K6 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C654, C754 Special Firmware Version GB5-K6 Support of SHA-256 (Version Up firmware for MIF devices)


2. Special Instructions on how to install these firmwares are provided in attached "Version Up firmware for MIF devices" document.
3. Please follow the attached procedures in setting up scan to Email using Microsoft® Office 365™.

[MasterT]

Hi there,

I hava Konica Minolta Bizhub C454 with ROM Version:

b-IZHUB-c454 — imgbb.com (https://ibb.co/GFdWSmz)

According to this MOBILEPRINT Brochure https://www.mykonicaminolta.com/wps/wcm/connect/newweb/3012706d-85e6-4d4b-a26a-8aafdf53ad41/Mobile_Print_App_Brochure.pdf?MOD=AJPERES&CONVERT_TO=url&CACHEID=ROOTWORKSPACE.Z18_H0261AK0LG7QE0AE0BVQU730 H1-3012706d-85e6-4d4b-a26a-8aafdf53ad41-m0NOmAg my device supports mobile printing but my Android Konica Minolta Print Service app cannot find it.

I guess i need a firmware update which i found out it can be downloaded from https://www.mykonicaminolta.com (https://www.mykonicaminolta.com/)

Problem is i don't have an account there.

So is there anyone available to help me with the right firmware update for my device?

Thanks.

[joelea]

Hi there,

I hava Konica Minolta Bizhub C454 with ROM Version:

42516

According to this MOBILEPRINT Brochure https://www.mykonicaminolta.com/wps/wcm/connect/newweb/3012706d-85e6-4d4b-a26a-8aafdf53ad41/Mobile_Print_App_Brochure.pdf?MOD=AJPERES&CONVERT_TO=url&CACHEID=ROOTWORKSPACE.Z18_H0261AK0LG7QE0AE0BVQU730 H1-3012706d-85e6-4d4b-a26a-8aafdf53ad41-m0NOmAg my device supports mobile printing but my Android Konica Minolta Print Service app cannot find it.

I guess i need a firmware update which i found out it can be downloaded from https://www.mykonicaminolta.com (https://www.mykonicaminolta.com/)

Problem is i don't have an account there.

So is there anyone available to help me with the right firmware update for my device?

Thanks.


cant see your pic very well mate

[MasterT]

Picture got resized somehow. I edited the post with a link for that picture.

Thanks.

[joelea]

Picture got resized somehow. I edited the post with a link for that picture.

Thanks.

are you using this?

PageScope Mobile for Android – Apps on Google Play (https://play.google.com/store/apps/details?id=com.kmbt.pagescopemobile.ui&hl=en_GB)

[Synthohol]

the copier has to be on the same subnet as the wireless for it to work.

[MasterT]

are you using this?

Yes I'm using it on daily bases.

[MasterT]

the copier has to be on the same subnet as the wireless for it to work.

It is on the same subnet network. I can print and scan using windows laptop wireless or wired connected.

It's not working from ios / android phone / tablet.

[Synthohol]

Konica Minolta Mobile Print v1.0
Reference
ID: KBA00033223
Konica Minolta Mobile Print v1.0



Konica Minolta Mobile Print is an app that allows you to connect your iOS device to a Konica Minolta MFP; the app integrates with the OS to enable trouble-free printing and importing scanned data. Konica Minolta Mobile Print is an application that allows you to easily connect to KONICA MINOLTA printing devices from your Android device using Wi-Fi. It enables you to print documents and images as well as import scanned data.

* Konica Minolta Mobile Print is a successor application to the PageScope Mobile.

Print Function:Prints images you have selected in the Photo Album function of the app via a connected MFP.

Opens any file stored in an integrated app from the Storage function and prints it via a connected MFP.

Prints emails and email attachments received when your email address is set up in the Konica Minolta Mobile Print app.

Supports Authentication and Secure Print to provide you with a more Secure printing environment.
You can print directly from your cloud storage, browser and camera app with the OS integration function.
The Android Printing Framework* enables you to print your emails.
Authentication and Secure Print functions allow you to print sensitive documents securely.

*Android Printing Framework is a function implemented in Android OS 4.4 or higher.


Scan Function:
Stores images you scanned via a remotely operated MFP using the Konica Minolta Mobile Print app on your mobile device into any OS-integrated app (a cloud storage app, etc.).
Scans a document or photo via a connected MFP from the Konica Minolta Mobile Print app to your mobile device and stores it in an OS-integrated app (cloud storage app, etc.).


Bluetooth LE Function:
Bluetooth LE enables the following operations:
- Registration of an MFP by touching
- Print by touching
- Scan by touching
- Authentication by touching


NFC Functions:
The following functions can be executed using NFC.
-Touch and print
-Touch and scan
-Touch and authenticate
-Touch and register MFP

KM Mobile Print App guide is attached for reference.
To view the PDF, you may need to download a free copy of Adobe Reader®
Adobe Acrobat Reader DC Download | Free PDF viewer for Windows, Mac OS, Android (http://www.adobe.com/products/acrobat/readstep2.html)

Konica Minolta Mobile Print released from App Store (iOS / Android has been released.
The Windows version is not released yet.

?iOS<Konica Minolta Mobile Print on the App Store (https://itunes.apple.com/us/app/konica-minolta-mobile-print/id1201610572?mt=8)>
?Android<Konica Minolta Mobile Print - Apps on Google Play (https://play.google.com/store/apps/details?id=com.konicaminolta.mobileprint&hl=en)>


Install:
Download application program from Google Play
Download application program from itunes.

[arahael]

Try mopria print app

[MasterT]

I have updated firmware with the latest version provided by copier tech (http://www.copytechnet.com/forums/members/copier-tech.html) Firmware Update - Printer & Copier Firmware (https://copierfirmware.co.uk/)

UPDATED — imgbb.com (https://ibb.co/9cjq5zW)

Android Konica Minolta Print Service app nor the Konica Minolta MObile Print app can detect printer.

Can someone help me with the settings needed to make it work?

PS. Mopria can detect printer but when i try to print i get message: Printer Blocked Memo, KONICA MINOLTA bizhub C454(81:06:F8)

Thanks.

[copier tech]

Once you have updated the firmware you need to turn on AirPrint in Admin>Network settings.

[MasterT]

Once you have updated the firmware you need to turn on AirPrint in Admin>Network settings.

There is no AirPrint option in device menu or web interface.

network-settings — imgbb.com (https://ibb.co/jygRv1N)

I figured out that if Bonjour is OFF printer cannot be detected on Android.

If Bonjour is ON than it can be detected by Mopria or default Samsung Print Service Plugin but cannot print due to some lock.

Screenshot-2019-05-06-18-38-12 — imgbb.com (https://ibb.co/q082hZx)

Maybe because AirPrint is not installed or enable, don't know.

As i said earlier Android Konica Minolta Print Service app nor the Konica Minolta MObile Print app cannot detect printer.

I don't have an iPhone at hand now, but i suppose that Apple Talk has to be ON to be detected on iOS.

I found this video on youtube about the AirPrint: YouTube (https://www.youtube.com/watch?v=jf1NNc1hMjY)

It's basicly saying there that if you don't have Function Version 7 you will not be able to print from phone or tablet.

AirPrint — imgbb.com (https://ibb.co/qn8zM24)

Well I only have Function Version 1: 20190506-184627 — imgbb.com (https://ibb.co/TMFcBLq)

So new Question arrise: How do i get Function Version 7 to be able to use Mobile Print as advertised?

Thanks.

[Synthohol]

If you have installed the latest firmware look through the readme file for that firmware and it will tell you somewhere about its which 25 and that will determine the function version

[MasterT]

If you have installed the latest firmware look through the readme file for that firmware and it will tell you somewhere about its which 25 and that will determine the function version

I only have a file named C454 C554 Firmware GF7-72.exe. After extraction there is no readme file.

copier tech (http://www.copytechnet.com/forums/members/copier-tech.html) can you help me on this one?

Thanks.

[MasterT]

I found something about the switches here:

http://www.copytechnet.com/forums/konica-minolta/100826-konica-minolta-c224e-airprint.html#post479452

changed switch 25 from HEX20 to HEX​50 <- change function ver.
switch 168 from HEX06 back to HEX00 <- toggle airprint on and of.


Could this be valid for C454 that i have?

[joelea]

Once you have updated the firmware you need to turn on AirPrint in Admin>Network settings.

only c454e supports airprint after fw update and function version 7

c454 doesn’t have any facility for airprint even with fw update

[joelea]

I found something about the switches here:

http://www.copytechnet.com/forums/konica-minolta/100826-konica-minolta-c224e-airprint.html#post479452

changed switch 25 from HEX20 to HEX​50 <- change function ver.
switch 168 from HEX06 back to HEX00 <- toggle airprint on and of.


Could this be valid for C454 that i have?

see reply above

[MasterT]

see reply above


only c454e supports airprint after fw update and function version 7

c454 doesn’t have any facility for airprint even with fw update

Well according to this MOBILEPRINT Brochure they do.

http://www.copytechnet.com/forums/redirect-to/?redirect=https%3A%2F%2Fwww.mykonicaminolta.com%2F wps%2Fwcm%2Fconnect%2Fnewweb%2F3012706d-85e6-4d4b-a26a-8aafdf53ad41%2FMobile_Print_App_Brochure.pdf%3FMOD %3DAJPERES%26CONVERT_TO%3Durl%26CACHEID%3DROOTWORK SPACE.Z18_H0261AK0LG7QE0AE0BVQU730H1-3012706d-85e6-4d4b-a26a-8aafdf53ad41-m0NOmAg

[tsbservice]

You want to print from Android device, right?
AirPrint is for Mac, iPhone, iPad, or iPod.
Install latest Konica Minolta Mobile Print app from Google Play and try again.

[joelea]

Well according to this MOBILEPRINT Brochure they do.

http://www.copytechnet.com/forums/redirect-to/?redirect=https%3A%2F%2Fwww.mykonicaminolta.com%2F wps%2Fwcm%2Fconnect%2Fnewweb%2F3012706d-85e6-4d4b-a26a-8aafdf53ad41%2FMobile_Print_App_Brochure.pdf%3FMOD %3DAJPERES%26CONVERT_TO%3Durl%26CACHEID%3DROOTWORK SPACE.Z18_H0261AK0LG7QE0AE0BVQU730H1-3012706d-85e6-4d4b-a26a-8aafdf53ad41-m0NOmAg


they dont, moral of the story is don’t always believe what you see in the brochure

[srvctec]

Well according to this MOBILEPRINT Brochure they do.

http://www.copytechnet.com/forums/redirect-to/?redirect=https%3A%2F%2Fwww.mykonicaminolta.com%2F wps%2Fwcm%2Fconnect%2Fnewweb%2F3012706d-85e6-4d4b-a26a-8aafdf53ad41%2FMobile_Print_App_Brochure.pdf%3FMOD %3DAJPERES%26CONVERT_TO%3Durl%26CACHEID%3DROOTWORK SPACE.Z18_H0261AK0LG7QE0AE0BVQU730H1-3012706d-85e6-4d4b-a26a-8aafdf53ad41-m0NOmAg

Well in that brochure there is an asterisk next to "Compatible Konica Minolta Engines*" and at the bottom it says: "* Supported Konica Minolta mobile print functions may vary based on engine ". I would take that to mean that AirPrint doesn't necessarily work with all listed engines.

[copier tech]

I found something about the switches here:

http://www.copytechnet.com/forums/konica-minolta/100826-konica-minolta-c224e-airprint.html#post479452

changed switch 25 from HEX20 to HEX​50 <- change function ver.
switch 168 from HEX06 back to HEX00 <- toggle airprint on and of.


Could this be valid for C454 that i have?

Unfortunately AirPrint is not supported on the non 'e' series even with the 'special' version up firmware.

42553

[benli21]

Synthohol,
Any chance you can get me versions GB0-A9 and GB2-K5?
it is to fix a specific scan error.

Notes:
1. NON-4e "Version Up firmware for MIF devices" is required to support SHA2. (bizhub C224/C284/C364/C454/C554/C654/C754)
You can use any of the following Special Firmware:



bizhub C224, C284, C364, C454, C554 Special Firmware Version GB0-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C654, C754 Special Firmware Version GB0-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C224, C284, C364, C454, C554 Special Firmware Version GB6-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C654, C754 Special Firmware Version GB6-K9 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C224, C284, C364, C454, C554 Special Firmware Version GB5-K6 Support of SHA-256 (Version Up firmware for MIF devices)
bizhub C654, C754 Special Firmware Version GB5-K6 Support of SHA-256 (Version Up firmware for MIF devices)


2. Special Instructions on how to install these firmwares are provided in attached "Version Up firmware for MIF devices" document.
3. Please follow the attached procedures in setting up scan to Email using Microsoft® Office 365™.



I just got a C454, and realise the machine is running on a very old firmware version 1. I would like to update that to enable Samba server and Airprint. I am really struggling to get the latest firmware of the printer and instruction about how to install the firmware. can you please help me to get the firmware for me?

[Synthohol]

please see below :)

[MasterT]

I just got a C454, and realise the machine is running on a very old firmware version 1. I would like to update that to enable Samba server and Airprint. I am really struggling to get the latest firmware of the printer and instruction about how to install the firmware. can you please help me to get the firmware for me?

I'll send you the firmware i have on Monday.

Actually a few days back I tried to resurrect the printing from android problem.

I installed the latest Konica Minolta Mobile Print from Google Play and surprise, It now prints and scans OK.

So after all the C454 firmware i got about a year ago had the necessary support in it but it most probably needed a Mobile Print update to work with it.

[copier tech]

I just got a C454, and realise the machine is running on a very old firmware version 1. I would like to update that to enable Samba server and Airprint. I am really struggling to get the latest firmware of the printer and instruction about how to install the firmware. can you please help me to get the firmware for me?

The C454 'non e' model does not support AirPrint even with the version up firmware.

45625

[benli21]

The C454 'non e' model does not support AirPrint even with the version up firmware.

45625
What about Samba server, the old one only have the Samba client. I really need the Samba server

[Rewind!]

Samba in relation to Unix/Linux, or support for older Mac's?

thanks!

JC

[Synthohol]

SMB works, just not SMB2 on the non e series.
also IMHO screw airprint, if the copier is on the same wired network as the wireless then as long as your device is using that wireless network you should be able to find and print and scan with the bizhub.
salespeople were selling the UK-xxx wireless kit and i kept returning them to the warehouse for customer credit and look like the hero.

[Walterj]

[CITA = GR81; 601912] ¿Toman el mismo firmware? [/ CITA]


buen día
Llevan diferentes fw ya que tienen diferentes procesadores.
Este es el acrónimo de fw para el C454 / C554 (A2XK0Y0-F000-G20-58), esta es la última versión de fw base del 05/02/2020.
Este es el acrónimo de fw para el C454e / C554e (A5C10Y0-F000-G20-K9).
Si te das cuenta de que las siglas son diferentes.
Ah, pero también hay archivos especiales que permiten que el C454 / C554 se comporte como el C454e / C554e.
Cualquier pregunta mi correo electrónico es walvaradocruz@gmail.com

[copier tech]

SMB works, just not SMB2 on the non e series.
also IMHO screw airprint, if the copier is on the same wired network as the wireless then as long as your device is using that wireless network you should be able to find and print and scan with the bizhub.
salespeople were selling the UK-xxx wireless kit and i kept returning them to the warehouse for customer credit and look like the hero.

With the ‘version up’ firmware SMB v2 is supported on the non ‘e’ Models.

[tsbservice]

With the ‘version up’ firmware SMB v2 is supported on the non ‘e’ Models.

Agree on that.

[Synthohol]

yes but frequently causes other issues. the model is dead and discontinued.
its like having an old car that used leaded gas, you can use unleaded with a bottle of lead substitute additive but will still run with knocks and pings.
all the non e series should be upgraded to a machine current with today's technology IF they cannot perform a function that requires upgraded security protocols.
if customer is broke they can always scan to USB and take it back to their PC and email/store the file that way.
when the inconvenience becomes too much of a PITA its funny how their wallets seem to open up.
when the manufacturer no longer supports a model you shouldn't have to either.
software companies have required upgrades that are paid for, this is the same principal.

[LJ Enterprise]

you have to be a KM dealer to gain access to the technical part of their site.
or contribute some money to this site and ill give you a link(s)
just an offer. i get nothing out of it either way.

contribution made. I would like the firmware link.

[Synthohol]

please be specific, what version firmware? what model exactly?

[Oystercopy]

KM website.

lol I see you got burned by the slick talking regional sales guy! we did too :mad::mad:

Yeah, so far, Muratec's tech support, F/W, Drivers, has been a big fat ZERO for me too!!

But I DO GET TO PAY an extra $10 to simply drop-ship a customer toner! How special!

[Synthohol]

please be specific, what version firmware? what model exactly?
same question, still waiting....

[copier tech]

same question, still waiting....


www.copierfirmwarr.co.uk