PDA

View Full Version : OpenAPI Version C224 series


Custom Search


leonardob
05-06-2018, 12:49 PM
Dear All ,

We are trying to implement an embedded application (follow me / pull print ) on the C224 Series for one of our customers , this application requires OpenAPI version 4 to run .

We are using Firmware - A1610Y0-F000-GB2-K9(00) which is giving us API version 3 .

Can anyone help us advising on how we could upgrade to OpenAPI version 4 ?

Help is greatly appreciated as we are on a dead end since the last 3 weeks.

Tks,

Synthohol
05-06-2018, 02:46 PM
upgrade the firmware to ver M1, it supports API ver 4.7
http://www.copytechnet.com/forums/attachments/konica-minolta/39602d1525614360-openapi-version-c224-series-api-jpg

Synthohol
05-06-2018, 04:47 PM
c224e or no e?
M1 is for the e version.
the non e ver only supports to v3.7

leonardob
05-09-2018, 04:27 PM
Hi Synthohol ,

I've found a on the Service Bulletin of the FW version A1610Y0-F000-GBF-M0 it supports OpenAPI version 4.7 for these models , but when we upgrade the firmware some how the OpenAPI version remains the same (V3.7) is these another way or process to upgrade the OpenAPI version ?

39629

Synthohol
05-09-2018, 05:15 PM
There is likely a software switch to change. Likely sw 25
Dunno which hex input though.

Custom Search